80 PSI PUMP (0.7 GPM FLOW) FOR M4 mws_apo_generated top and bottom buckle

top and bottom buckle

Charger changes to long term battery maintenance mode after full charge is achieved

Includes short strain relief hose with female nylon quick release and 60 inch hose with male quick release

superior extended size

6 Stainless Steel Bolts + Lock Nuts

80 PSI PUMP (0.7 GPM FLOW) FOR M4 mws_apo_generated top and bottom buckleLance demonstrates how to change out the M4 pump with a standard Philips Screw Driver and needle nose pliers in 30 minutes or less. 80 PSI . 7GPM 12 VOLT 1. 8 AMP SANTOPRENE DIAPHRAGM PUMP WITH AUTOMATIC PRESSURE REGULATOR. M18X1. 5MM THREADED OUTPUT AND 3 8" BARBED INTAKE. FLOW DIRECTION FOR THE TOP VIEW SHOWN IS FROM LEFT TO RIGHT. THIS IS THE CORRECT REPLACEMENT PUMP FOR THE LATEST M4 SPRAYER WITH A BATTERY DOOR. SEE PICTURE OF INSTALLED PUMP. IF